VoIP nach 5 Sekunden wird erst Ton übertragen

VoIP nach 5 Sekunden wird erst Ton übertragen

VoIP nach 5 Sekunden wird erst Ton übertragen
VoIP nach 5 Sekunden wird erst Ton übertragen
2024-10-23 08:38:38 - last edited a week ago
Model: Archer VR600v  
Hardware Version: V2
Firmware Version: 0.7.0 0.9.1 v0075.0 Build 220113 RC.35279n

Hi.

Ich habe ein Problem und hoffe hier auf Hilfe.

Ich habe einen DSL 50 Anschluß von EWE.

Internet und VoIP sind verbunden und funktionieren.

Problem: Egal ob ich angerufen werde oder ich Anrufe. Wenn das Gespräch angenommen wird dauert es 5 sek bevor der Ton übertragen wird.

Das gilt für alle Gespräche in alle Netze ankommend und abgehend.

 Ich hoffe jemand hier hat bereits eine Lösung gefunden.

 

Danke

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:VoIP nach 5 Sekunden wird erst Ton übertragen-Solution
2024-10-25 08:41:07 - last edited a week ago

  @Sunshine 

Thanks for the answer.

I have already done that simultaneously.

After sending the requested data, I have not heard anything.

I originally bought the vr600v second-hand for testing purposes.

I wanted an alternative to the, in my opinion, overpriced fritzbox.

Now I will probably buy a new fritzbox if the problem is not solved.

 

My personal guess is that it takes so long for the codec for sound transmission to be recognized. Because my provider only supports g.711 and g.722. Unfortunately, useless codecs cannot be deactivated.

 

Thx

Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:VoIP nach 5 Sekunden wird erst Ton übertragen
2024-10-24 07:26:13

  @Jogi229 

Hi,

 

If you have another modem router that also supports VOIP function, it is recommended to set up on the other one and compare.

If you have other landline phones available, please test them as well.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:VoIP nach 5 Sekunden wird erst Ton übertragen
2024-10-24 07:50:14

  @Sunshine 

I previously had a fritzbox 7360 on this DSL connection.

This problem did not occur here. Not even now when I reconnect the fritzbox.

The telephone is connected to fon1 via cable. I have no access to the internal telephone book via DECT.

Whereas the problem is with DECT and cable

  0  
  0  
#3
Options
Re:VoIP nach 5 Sekunden wird erst Ton übertragen
2024-10-25 08:06:34

  @Jogi229 

Hi,

Thanks for your update.

 

We currently do not have any further suggestions for the situation you described.

You can contact local support for further help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:VoIP nach 5 Sekunden wird erst Ton übertragen-Solution
2024-10-25 08:41:07 - last edited a week ago

  @Sunshine 

Thanks for the answer.

I have already done that simultaneously.

After sending the requested data, I have not heard anything.

I originally bought the vr600v second-hand for testing purposes.

I wanted an alternative to the, in my opinion, overpriced fritzbox.

Now I will probably buy a new fritzbox if the problem is not solved.

 

My personal guess is that it takes so long for the codec for sound transmission to be recognized. Because my provider only supports g.711 and g.722. Unfortunately, useless codecs cannot be deactivated.

 

Thx

Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 94

Replies: 4

Related Articles