TP-Mr6400 not detecting sim card after a short period of time

TP-Mr6400 not detecting sim card after a short period of time

TP-Mr6400 not detecting sim card after a short period of time
TP-Mr6400 not detecting sim card after a short period of time
2024-10-30 19:02:12 - last edited 2024-11-04 06:10:32
Tags: #connection
Model: TL-MR6400  
Hardware Version: V3
Firmware Version: not sure

Hello, basically my mr6400 router was working all fine a week ago and now it started having some serious issues, it detected the sim card for a very short time and just doesnt detect it anymore?? i put in a simcard, turn the device on, it flashes the wifi logo for a bit, then just stops and stays lit while none of the other ones light up, ive tried this with 2 sims that previously used to work. if i put the sim in my phone, everything works fine... i hope someone can help me :(

  0      
  0      
#1
Options
1 Accepted Solution
Re:TP-Mr6400 not detecting sim card after a short period of time-Solution
2024-10-31 12:00:11 - last edited 2024-11-04 06:10:32

  @kajus5555 

Hi,

 

The LED lights are abnormal, please test with different wall sockets and check if the power light would be solid after you power it on.

If the issue still exists, please reset the router and check again.

 

If only the Wi-Fi light remains on, please contact local support to check warranty.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TP-Mr6400 not detecting sim card after a short period of time-Solution
2024-10-31 12:00:11 - last edited 2024-11-04 06:10:32

  @kajus5555 

Hi,

 

The LED lights are abnormal, please test with different wall sockets and check if the power light would be solid after you power it on.

If the issue still exists, please reset the router and check again.

 

If only the Wi-Fi light remains on, please contact local support to check warranty.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 217

Replies: 1

Tags

connection
Related Articles