Problem adding more than 3 deco (M4 and e4)

Problem adding more than 3 deco (M4 and e4)

Problem adding more than 3 deco (M4 and e4)
Problem adding more than 3 deco (M4 and e4)
3 weeks ago

Hello,

 

I have 3 deco M4 working "fine" since years.

 

I bought 3 deco E4 to extend my network, they are working fine together on a new network, but when I add them into MY network compose of 3 M4, it does not work at all.

 

They remains offline, even if the led is white. It's not working properly.

 

After hours of debuging, I just bought 3 new M4 sonI will have exactly 6 x M4, exact same model.

 

it still don't work.

 

Impossible to connect 6 m4 properly, i checked and according to tp link it should work fine, even with M4 and E4 on the same network...

 

they're up to date, I don't know what to do next

 

any suggestion ?

 

regards

  0      
  0      
#1
Options
3 Reply
Re:Problem adding more than 3 deco (M4 and e4)
3 weeks ago

  @Nqrcotik 

Hi,

 

All Deco models are able to work together.

For your case, you can reset the new units and add them to the current network one by one.

How to add an additional unit to your Deco network

And please place the units next to the main router and add them.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Problem adding more than 3 deco (M4 and e4)
3 weeks ago

  @Sunshine 

 

I already tried EVERYTHING possible, in every way.

 

Made a network for every bundle of M4 (2 x 4) to update them properly then reseted everyone.

 

Now I just realised that I have one bundle M4 v2 and the other one is M4 v4.  I don't know if it's could be a problem.

 

I will cancel my M4 order until I can't do it anymore.

 

I don't know I found everywhere that we could put different model of deco in a single network, but it seems it's false sincerely.

 

  0  
  0  
#3
Options
Re:Problem adding more than 3 deco (M4 and e4)
2 weeks ago

  @Nqrcotik 

Hi,

 

You can check if this is your issue, and update the firmware here.

Satellite Deco Units Work Well but Display Offline on the Deco APP

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 109

Replies: 3

Related Articles