Home Network Community > All Threads > configure Archer MR600 for access from the internet
< All Threads

configure Archer MR600 for access from the internet

configure Archer MR600 for access from the internet

configure Archer MR600 for access from the internet
configure Archer MR600 for access from the internet
Tuesday - last edited Thursday
Tags: #Port Forwarding
Model: Archer MR600  
Hardware Version: V3
Firmware Version:

i TRIED TO CONFIGURE THE ROUTER TO ACCESS IT FROM THE INTERNET.
I could find 'how to' for nat forwarding and virtual servers, but nothing gave me the possibility to enter my lan from outside.
I also tried DDNS with noip and tplink ddns, but as this did not work neither I did a reset, looked-up my external IP address and supposed that as long as that not changes acces directly to that ip address should work.
No-ip ddns is required when my provider alters the ip address.
Is there anybody who can help me?

  0      
 
  0      
 
#1
Options
1 Reply
Re:configure Archer MR600 for access from the internet
Thursday

  @Raymondvg 

 

Hi, thanks for posting question here.

This article may help you with port forwarding rules:  How to use NAT Forwarding function on TP-Link Wireless 4G LTE Router

Additionally, here are some tips for you if port forwarding doesn't work:

    1. Make sure the server is accessible from the internal network.

    2. Make sure your router obtains the public WAN IP address, if your WAN IP is not a public one, port forwarding will not work. (CGNAT address is also private IP address that ranges from 100.64.0.0 to 100.127.255.255.)

    3. Check the firewall settings of your server, make sure it allows traffic from the outside Internet.

You may check more detailed instruction following this guide.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 41

Replies: 1

Tags

Port Forwarding
Related Articles
WAN configuration for Archer MR600
17006 0
I would like to manage my Archer Mr600 configuration via the cloud.
163 0
Archer Mr600 Internet through lan
1147 0
Archer MR600 V2 LAN ports don't work when WAN backup configuration is set
1137 0
Remote Access Archer MR600
1434 3
MR600 464xlat support
1567 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.