XE75 Deco DHCP not worling on ethernet cable

XE75 Deco DHCP not worling on ethernet cable

XE75 Deco DHCP not worling on ethernet cable
XE75 Deco DHCP not worling on ethernet cable
2025-02-02 18:13:26 - last edited a week ago
Tags: #Network Connectivity #DHCP on Ethernet
Model: Deco   Deco XE75  
Hardware Version:
Firmware Version: 1.4.1

DhCP not working on internet cable. WiFi OK

Have rebooted everything still no hard wire connection all indications are that the cable is connected and network test have it showing up intermittently but not connecting to internet. DHCP faults are flagged This setup has been running without fault for over a year suddenly has faulted nothing changed on the network.

  0      
  0      
#1
Options
1 Accepted Solution
Re:XE75 Deco DHCP not worling on ethernet cable-Solution
2025-02-06 12:05:51 - last edited a week ago

  @David-Shyre 

 

Hi, welcome to our community.

Here are suggestions for your reference:

1. Check the Ethernet cable between your device and the Deco. Please change another cable to confirm.

2. Change another port on Deco to confirm.

3. Connect your device to other network devices using same ethernet cable to confirm.

4. Try Address Reservation for your wired device.

Thank you and best regards.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:XE75 Deco DHCP not worling on ethernet cable-Solution
2025-02-06 12:05:51 - last edited a week ago

  @David-Shyre 

 

Hi, welcome to our community.

Here are suggestions for your reference:

1. Check the Ethernet cable between your device and the Deco. Please change another cable to confirm.

2. Change another port on Deco to confirm.

3. Connect your device to other network devices using same ethernet cable to confirm.

4. Try Address Reservation for your wired device.

Thank you and best regards.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 71

Replies: 1

Tags

Network Connectivity
DHCP on Ethernet
Related Articles