Region : Argentina

Model : TL-WA901ND

Hardware Version : V3

Firmware Version :

ISP :

Hello, I have 3 WA5210G and all the 3 are connected to a switch. I have 2 NIC's on my server one is connected to the internet and is shared with ICS, and the switch is connected to the other NIC.Am using a 3G modem as a source of my internet. Below are the details of the connections

NIC-1
IP: 192.168.1.2
Subnet: 255.255.255.0
Default Gateway: 192.168.1.1 (the ip of my wireless 3g router TL-MR3420)

NIC-2
IP: 192.168.0.1
Subnet: 255.255.255.0
Default Gateway:

below are the configuration for my WA5210G access points

AP-1
IP: 192.168.0.10
Subnet: 255.255.255.0
Default Gateway: 192.168.0.1(the ip of NIC-2) since the switch is connected to that port)

AP-2
IP: 192.168.0.11
Subnet: 255.255.255.0
Default Gateway: 192.168.0.1(the ip of NIC-2) since the switch is connected to that port)

AP-3
IP: 192.168.0.12
Subnet: 255.255.255.0
Default Gateway: 192.168.0.1(the ip of NIC-2) since the switch is connected to that port)

If I connects, I gets limited connection and no internet access. Please help me on how to make this run smoothly. Thank you so much.