Transfer Speed WDR4300 & AC1750
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Transfer Speed WDR4300 & AC1750
Region : Brazil
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I have an WDR4300.
Considering the 5GHZ band , of maximum 450mbps it will get about 56MB/s in a file transfer ok?
(NOT BY A USB HARD DISK PLUGUED TO ROUTER, OF COURSE)
BY A WIRED PC , OR AN EHTERNET GIGABIT NAS OR HARD DRIVE CONNECTED TO RJ45 ROUTER'S PORT
In front of the router (0m) i can get about 17 - 20Mb/S (about 160mbps)
From a distance about 4m i only can get 7MB/s.
Anynone have made these tests?
My 5GHz band is at WPA2 AES, 40MHZ, only N
I used the software inssider. NO 5GHz band detected. Only mine. So, no interference.
What can i do to upgrade this?
Another Question: Anyone made theses tests with the new tplink AC1750 ?
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I have an WDR4300.
Considering the 5GHZ band , of maximum 450mbps it will get about 56MB/s in a file transfer ok?
(NOT BY A USB HARD DISK PLUGUED TO ROUTER, OF COURSE)
BY A WIRED PC , OR AN EHTERNET GIGABIT NAS OR HARD DRIVE CONNECTED TO RJ45 ROUTER'S PORT
In front of the router (0m) i can get about 17 - 20Mb/S (about 160mbps)
From a distance about 4m i only can get 7MB/s.
Anynone have made these tests?
My 5GHz band is at WPA2 AES, 40MHZ, only N
I used the software inssider. NO 5GHz band detected. Only mine. So, no interference.
What can i do to upgrade this?
Another Question: Anyone made theses tests with the new tplink AC1750 ?