Virtual Server Edit Error (port 80)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Virtual Server Edit Error (port 80)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Virtual Server Edit Error (port 80)
Virtual Server Edit Error (port 80)
2014-09-15 21:31:09
Hi,

I cannot create a NAT rule for port 80, each time I get the error " Cannot update virtual server entry: External port conflict with remote access. Status: 9007."
Before the error I get a warning " Since port 80 is used, the DSL Modem Router WEB server could not be accessed through this interface". that is fine but still the port cannot be opened.
I have already removed the ticks on Managements\AccessControl\RemoteAccess, but I cannot find any reference on where (eventually) completely disable the remote web interface!
So far I had to create a rule with external port 81 to internal port 80

Thank you
Giangi
  0      
  0      
#1
Options
4 Reply
Re:Virtual Server Edit Error (port 80)
2014-11-22 12:22:58
Hi TP-Link,
Same problem here.
I just bought this one today and found that there is no way to change the default modem web port to something else to have virtual web server inside the network.
All other router have an option to change the default webport to something else.
TP-Link should see this conflic design. Router allows user to select Web server HTTP in NAT service list but then says conflict with your default device port????
This should be fixed ASA in next firmware.
Also, what is the support account password? try support/support does not work? It is dangerous that people enables web remote access and cannot change this support password.

Firmware Version: 1.1.1 Build 140815 Rel.40202
Hardware Version: TD-W8960N V5 0x00000001
  0  
  0  
#2
Options
Re:Virtual Server Edit Error (port 80)
2014-11-24 15:31:28
TD-W8960N V5 supports inconsistant external and internal port. The port 80 is used by w8960 itself and it cannot be modified but you can solve it as Giangi mentioned in the end.
  0  
  0  
#3
Options
the same problem on TD-W8960N V7
2017-06-17 05:48:31
shame on you tplink
after six years, your new hardware (V7) has this problem too, and there is not any firmware update for it.
plese fix this in the next firmware asap
2017.06
  0  
  0  
#4
Options
Re:Virtual Server Edit Error (port 80)
2017-06-17 05:52:20
shame on you tp-link
the new TD-W8960Nhttp://static.tp-link.com/res/down/doc/TD-W8960N(EU)_V7_QIG.pdf V7 has this problem after 6 years! and there is not any firmware update for it :mad:
please fix this issue in the next firmware update asap...
  0  
  0  
#5
Options