Severe interference from WPA4220 set up on ADSL2+ connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Severe interference from WPA4220 set up on ADSL2+ connection
Region : UnitedKingdom
Model : TL-WPA4220
Hardware Version : V1
Firmware Version :
ISP :
I have been running my WPA4220 since December 2013 and until fairly recently had not noticed any problems In the past 2-3 weeks I have been seeing horrendous errors on my ADSL2+ connection with thousands of CRC, FEC and Error Second errors on my connection. Initially it was suggested that Powerline extenders might be at fault so I turned off my WPA4220 and it made no significant difference however I decided to test one more time with them physically unplugged form the mains socket and for the past 36 hours I have been back to normal error rates, the reduction coincided exactly with when I unplugged the adapters.
Has anyone else seen problems like this. Is it likely my adapters have started to fail in some way?
Stuart
Model : TL-WPA4220
Hardware Version : V1
Firmware Version :
ISP :
I have been running my WPA4220 since December 2013 and until fairly recently had not noticed any problems In the past 2-3 weeks I have been seeing horrendous errors on my ADSL2+ connection with thousands of CRC, FEC and Error Second errors on my connection. Initially it was suggested that Powerline extenders might be at fault so I turned off my WPA4220 and it made no significant difference however I decided to test one more time with them physically unplugged form the mains socket and for the past 36 hours I have been back to normal error rates, the reduction coincided exactly with when I unplugged the adapters.
Has anyone else seen problems like this. Is it likely my adapters have started to fail in some way?
Stuart