How to configure Archer D5 as router/AP only?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to configure Archer D5 as router/AP only?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to configure Archer D5 as router/AP only?
How to configure Archer D5 as router/AP only?
2014-10-01 15:59:57
Region : UnitedKingdom

Model : TD-W8968

Hardware Version : V3

Firmware Version : 0.9.1 0.4

ISP : Zen


Trying to get a setup where old-but-fast (see other thread) DG834PN is the ADSL modem, with cabled connection to WLAN port of my D5,
which then acts as firewall, NAT, router, wireless access point etc. for my home network.

Can't find any description of exactly how to configure this -- in particular, having configured the DG834PN as modem-only,
do I then need to configure the D5 to do the login to my ISP? If so, how?
  0      
  0      
#1
Options
7 Reply
Re:How to configure Archer D5 as router/AP only?
2014-10-06 02:14:49
D5 can support your ADSL line.
  0  
  0  
#2
Options
Re:How to configure Archer D5 as router/AP only?
2014-10-08 06:17:07

jimasek wrote

D5 can support your ADSL line.


Indeed it will, but at 50% the speed of my old Netgear, see post a few days ago: http://forum.tp-link.com/showthread.php?77567-New-TP-Link-AC1200-aka-Archer-D5-50-slower&region=china
  0  
  0  
#3
Options
Re:How to configure Archer D5 as router/AP only?
2014-10-08 14:42:28

hthompson wrote

Indeed it will, but at 50% the speed of my old Netgear, see post a few days ago: http://forum.tp-link.com/showthread.php?77567-New-TP-Link-AC1200-aka-Archer-D5-50-slower®ion=china


You can try AP mode and use DG834PN as modem router.
There is a similar instruction for different models which should be helpful in your case.
http://www.tp-link.com/en/article/?faqid=417

By the way, did you compare upstream and downstream on DG834PN with D5?
  0  
  0  
#4
Options
Re:How to configure Archer D5 as router/AP only?
2014-10-09 03:14:19

Ada wrote

You can try AP mode and use DG834PN as modem router.
There is a similar instruction for different models which should be helpful in your case.
http://www.tp-link.com/en/article/?faqid=417


Yes, I finally got that working, the secret is to use distinct subnets for your LAN and EWAN

By the way, did you compare upstream and downstream on DG834PN with D5?


Yes, upstream is identical to either on their own.
Downstream single-port is perhaps a little down from DG834PN on its own, but much better than D5.
Downstream multiple-port is pretty much the same as the other two.
  0  
  0  
#5
Options
Re:How to configure Archer D5 as router/AP only?
2014-10-09 10:46:01
I heard change DSL modulation type to ADSL2+ may improve upstream and downsteam. But if you use AP mode, it doesn't really matter. AP mode works OK now??
  0  
  0  
#6
Options
Re:How to configure Archer D5 as router/AP only?
2014-10-11 20:52:11

Mavis wrote

I heard change DSL modulation type to ADSL2+ may improve upstream and downsteam. But if you use AP mode, it doesn't really matter. AP mode works OK now??


I've tried both modulation types with PPPoA, no difference, still 50% slower than old modem
  0  
  0  
#7
Options
Re:How to configure Archer D5 as router/AP only?
2014-10-13 13:41:49
You should report this problem and what you've done to http://ticket.tp-link.com/index.php?/Tickets/Submit. Hope it helps.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 2539

Replies: 7

Related Articles