How to check signal strength on Windows 8.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to check signal strength on Windows 8.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to check signal strength on Windows 8.1
How to check signal strength on Windows 8.1
2014-12-27 11:53:58
Region : Australia

Model : TD-W8980

Hardware Version : V1

Firmware Version :

ISP :


I'm only seeing 4 bars when WI-FI connects on my wife's laptop compared with 5 bars I used to see on my old Billion router. I'm on NBN in South Australia and speed test shows 47 download (but that's probably not relevant). How do I find the actual strength of the signal she is receiving (ASUS Intel i7 3700),

Also how do I tell whether she is receiving on the 2.4GHZ or 5GHZ channel and what is the best setup in the router for those wireless channels.

Thanks,

Peter
  0      
  0      
#1
Options
5 Reply
Re:How to check signal strength on Windows 8.1
2014-12-29 11:34:04
Single bar is not important..Getting 4 bars is good enough.

What router are you using? Model : TD-W8980 is not a dual band router.
  0  
  0  
#2
Options
It is Dual Band
2014-12-29 14:25:14

Tobacco wrote

Single bars is not important..Getting 4 bars is good enough.


OK, it just seems slower than before.

What router are you using? Model : TD-W8980 is not a dual band router.


The Quick Installation Guide says it is "Dual Band" and in the setup screen for wireless both bands are showing.

Cheers,

Peter
  0  
  0  
#3
Options
Re:How to check signal strength on Windows 8.1
2014-12-31 09:50:34
It is dual band indeed. For 2.4GHz, try channel 1, 6 or 11. For 5GHz, try differnet ones.
Change channel width to 40MHz and secure the network with WPA2-PSK, AES.
  0  
  0  
#4
Options
Re:How to check signal strength on Windows 8.1
2014-12-31 13:16:37

Ada wrote

It is dual band indeed. For 2.4GHz, try channel 1, 6 or 11. For 5GHz, try differnet ones.
Change channel width to 40MHz and secure the network with WPA2-PSK, AES.


Thanks, Ada. Changing the channel width from Auto to 40MHz improved the speed to 72 in Network settings.
  0  
  0  
#5
Options
Re:How to check signal strength on Windows 8.1
2014-12-31 15:21:39

posword wrote

OK, it just seems slower than before.



The Quick Installation Guide says it is "Dual Band" and in the setup screen for wireless both bands are showing.

Cheers,

Peter


Sorry, I've mistaken the number with W8968..;)

Using 40Mhz bandwidth will provide high throughput when there is few other Wi-Fi networks around.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 789

Replies: 5

Related Articles