Cannot define the TP-Link TL-WR841N as repeater
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot define the TP-Link TL-WR841N as repeater
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V2
Firmware Version :
ISP :
Hi,
My purpose is to extend the wireless coverage with same SSID and security
I didn't find in the manual the repeater option: http://www.tp-link.com/Resources/document/TL-WR841N_V8_User_Guide.pdf
I followed this manual: http://www.tp-link.com/en/article/?faqid=227
But during setup it tells me that the repeater and the main router should carry the same channel. Once I did that, Wi-Fi performance decreased from 30Mbps to 2Mbps.
If I defined different channels, there is no Internet in the repeater.
Please advise.
Model : TL-WR1043ND
Hardware Version : V2
Firmware Version :
ISP :
Hi,
My purpose is to extend the wireless coverage with same SSID and security
I didn't find in the manual the repeater option: http://www.tp-link.com/Resources/document/TL-WR841N_V8_User_Guide.pdf
I followed this manual: http://www.tp-link.com/en/article/?faqid=227
But during setup it tells me that the repeater and the main router should carry the same channel. Once I did that, Wi-Fi performance decreased from 30Mbps to 2Mbps.
If I defined different channels, there is no Internet in the repeater.
Please advise.
