TL-WR743ND configure with wired devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR743ND configure with wired devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR743ND configure with wired devices
TL-WR743ND configure with wired devices
2015-05-04 15:52:12
Region : Egypt

Model : TL-WR743ND

Hardware Version : V2

Firmware Version : 131129

ISP : TE-Data ADSL, EGYPT


i've an old access point .. i purchased a new TP-Link TL-WR743ND

i want to receive wifi signal from the old access point to the new .. and connect a wired device

like that : [ Old AP )))) (((( TL-WR743ND ---cable---> PC ]

i tried client mode and no connection to the pc

please help step by step

thank you
  0      
  0      
#1
Options
3 Reply
Re:TL-WR743ND configure with wired devices
2015-05-04 17:36:52
Client mode is what you need indeed.
What's the security settings on your old AP? Did you select corresponding settings when configuring WR743ND?
What's the IP address of your old AP? Change WR743ND's IP to be in the same subnet.
  0  
  0  
#2
Options
Re:TL-WR743ND configure with wired devices
2015-05-04 18:04:52
security settings on old AP : WPA-PSK/WPA2-PSK, TKIP and AES
but sorry, i don't understand what is corresponding settings ..

the old AP, WR743ND and the PC are in the same subnet
  0  
  0  
#3
Options
Re:TL-WR743ND configure with wired devices
2015-05-05 11:41:31
If so, Wireless Security Mode is Most Secure(WPA/WPA2-PSK)?
Did you enable wireless MAC filter on the old AP?
After finish the configuration, what's the IP address obtained on PC connected to WR743ND?
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 594

Replies: 3

Related Articles