TD-W8960N problem with virtual server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TD-W8960N problem with virtual server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8960N problem with virtual server
TD-W8960N problem with virtual server
2015-10-26 04:07:54
Model : TD-W8960N

Hardware Version : V5

Firmware Version : 1.1.1 Build 141107 Rel.34856

ISP : Telecom Italia

My router has IP address : 192.168.1.1
the firmware is the last one available 1.1.1 Build 141107 Rel.34856
I have a camera with IP CAM server
This camera has an ip : 198.168.1.103
the server of this camera runs on port 1025 (I tried on other doors ) .
I access the browser correctly to this camera and its server using the address 198.168.1.103:1025


I enabled the virtual server by enabling port 1025 traffic < TCP / UDP > .
I did some testing with http://www.yougetsignal.com/tools/open-ports/
and port 1025 is open correctly .


Outside the router has a public address
x.y.z.k


if you try to access the camera by going to the browser
with x.y.z.k 1025


I can not access the camera .
I did not do it antivirus firewall active .


You can provide support
Thank you
  0      
  0      
#1
Options
1 Reply
Re:TD-W8960N problem with virtual server
2015-11-03 15:52:21
The internal port and external port are both 1025,right?If you have done this settings,it should work.Are you choosing the correct Use Interface?
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 782

Replies: 1

Related Articles