No internet connection with WA730RE
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No internet connection with WA730RE
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi, I've read and tried related questions, but still cannot get WA730RE to work as a range extender:
My router is a ZTE ZXV10 W300
The router is controlled by my ISP and they will not give me access to it. (Its also a dynamic IP if that matters?)
My TP-LINK WA730RE Ver.2.2
S/N 13890104125
Firmware Version:
3.16.6 Build 130510 Rel.63318n
Hardware Version:
WA730RE v2 00000000
From ipconfig my data is as follows:
IPv4 Address 192.168.1.2
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Connection to WA730RE via Ethernet Cable
After completing 'quick' setup I enter Network - Lan and enter the settings as this post: http://forum.tp-link.com/showthread.php?78075-INPUT-from-RJ45&highlight=WA730RE
Type Static
IP Address 192.168.1.19
Subnet Mask 255.255.255.0
Gateway 192.168.1.1 (also tried default 0.0.0.0)
I have access to the WA730RE, but this is intermittent; I have to reboot either the router or the WA730RE or both on a continual basis, at 1st load times for WA730RE are fairly quick, then tail off.. so have to reboot. During this I have no internet access, the only way to regain internet access is to turn off the WA730RE and reboot my router.
The firmware version seems the latest one to me.
I have tried various other settings, but the above is my best attempt.
I have been pulling my hair out for around 2 weeks now, so I'm hoping somebody can help me.
If you require more info please ask.
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi, I've read and tried related questions, but still cannot get WA730RE to work as a range extender:
My router is a ZTE ZXV10 W300
The router is controlled by my ISP and they will not give me access to it. (Its also a dynamic IP if that matters?)
My TP-LINK WA730RE Ver.2.2
S/N 13890104125
Firmware Version:
3.16.6 Build 130510 Rel.63318n
Hardware Version:
WA730RE v2 00000000
From ipconfig my data is as follows:
IPv4 Address 192.168.1.2
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Connection to WA730RE via Ethernet Cable
After completing 'quick' setup I enter Network - Lan and enter the settings as this post: http://forum.tp-link.com/showthread.php?78075-INPUT-from-RJ45&highlight=WA730RE
Type Static
IP Address 192.168.1.19
Subnet Mask 255.255.255.0
Gateway 192.168.1.1 (also tried default 0.0.0.0)
I have access to the WA730RE, but this is intermittent; I have to reboot either the router or the WA730RE or both on a continual basis, at 1st load times for WA730RE are fairly quick, then tail off.. so have to reboot. During this I have no internet access, the only way to regain internet access is to turn off the WA730RE and reboot my router.
The firmware version seems the latest one to me.
I have tried various other settings, but the above is my best attempt.
I have been pulling my hair out for around 2 weeks now, so I'm hoping somebody can help me.
If you require more info please ask.