AP500 Bridging Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AP500 Bridging Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
48 Reply
Re:AP500 Bridging Problem
2017-07-19 19:50:46

deniTHOR wrote

That´s the version i got provided on my case. MultiSSID is working and you wont get a loop anymore with two APs in multiSSID Mode.
I did not test more than that. The AP still sends out his own traffic untagged (no ntp, no logging and no management from lan side).
The AP500 is like a beta version product - You pay money for just to find out later what will not work - And it seems TP-Link does not care much.


Hi, can you tell me exactly what firmware version they provided to you?

I was given "1.0.0 Build 20161220 Rel. 69936", it does not fix the VLAN tagging problem.

To recap: Traffic from SSIDs mapped to any VLAN other than 1 leave the AP500's wired interface untagged. Basically, it looks like nothing leaves the AP500's wired interface tagged at all.
  0  
  0  
#12
Options
Re:AP500 Bridging Problem
2017-07-19 21:39:19
The version from the linked zip-file was the last one i got while working on my case: AP500_un-up-ver1-0-0-P1[20160607-rel48929].bin

They did fix my reported bugs regarding the loop and missing VLAN tags in multiSSID Mode. It worked for me but is far from perfect since i can´t manage the APs from hosts on the wired side.
The missing management VLAN and untagged traffic sourced from the AP was not addressed.
What i learned too was that a newer build might not have all fixes from previous builds...
  0  
  0  
#13
Options
Re:AP500 Bridging Problem
2017-07-21 08:59:55
hi deniTHOR, try this beta firmware, it says to solve untagged traffic sourced from the AP.
http://static.tp-link.com/AP500_eu-up-ver1-0-0-P1[20170720-rel38914].rar
but i don't this this AP support management vlan.
  0  
  0  
#14
Options
Re:AP500 Bridging Problem
2017-07-21 19:31:09

deniTHOR wrote

The version from the linked zip-file was the last one i got while working on my case: AP500_un-up-ver1-0-0-P1[20160607-rel48929].bin

They did fix my reported bugs regarding the loop and missing VLAN tags in multiSSID Mode. It worked for me but is far from perfect since i can´t manage the APs from hosts on the wired side.
The missing management VLAN and untagged traffic sourced from the AP was not addressed.
What i learned too was that a newer build might not have all fixes from previous builds...


Unfortunately that version somehow could not install in my AP500. Unsupported hardware version. My hardware version is 1.0... didn't know there was any other hardware version at this time?
  0  
  0  
#15
Options
Re:AP500 Bridging Problem
2017-07-21 19:32:18

uutommi wrote

hi deniTHOR, try this beta firmware, it says to solve untagged traffic sourced from the AP.
http://static.tp-link.com/AP500_eu-up-ver1-0-0-P1[20170720-rel38914].rar
but i don't this this AP support management vlan.


This didn't work for me either. The packets still exit the AP500's wire interface untagged, but they ought to have been tagged according to the VLAN mapped from the SSID.
  0  
  0  
#16
Options
Re:AP500 Bridging Problem
2017-07-22 23:10:53
My AP500 v1.0 said "The hardware version is not supported".
To send out tagged packets it would require to configure a VLAN ID. Well - They could just use the lowest configured one from the SSIDs - Would be not good but better than doing nothing...
Did you know that the AP can be managed from every SSID? You only need to know the IP of he AP and get your client one from the same subnet. This is not so cool if you plan one SSID as open Hotspot. Happy Hacking...
  0  
  0  
#17
Options
Re:AP500 Bridging Problem
2017-07-28 17:38:57

lzs wrote

This didn't work for me either. The packets still exit the AP500's wire interface untagged, but they ought to have been tagged according to the VLAN mapped from the SSID.


Better to send an email to support.sg@tp-link.com to report the issue.
  0  
  0  
#18
Options
Re:AP500 Bridging Problem
2017-08-08 13:35:14
Same Problem. Only way is to wait and wait and wait or to sell this shi...... Access Point.. thx Tp-Link for this really really great support.
  0  
  0  
#19
Options
Re:AP500 Bridging Problem
2017-08-08 17:18:06
did you tried the beta firmware provided by uutommi
  0  
  0  
#20
Options
Re:AP500 Bridging Problem
2017-08-08 17:19:28

lzs wrote

This didn't work for me either. The packets still exit the AP500's wire interface untagged, but they ought to have been tagged according to the VLAN mapped from the SSID.


Did you contact tp-link support ? any progress?
  0  
  0  
#21
Options
Related Articles