what IP to do a original firmware recovery at WR1043nd v2 ?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
what IP to do a original firmware recovery at WR1043nd v2 ?
Model : WR1043nd v2
Hardware Version : v2
I refer to http://wiki.openwrt.org/toh/tp-link/tl-wr841nd#go_back_to_original_firmware
There is to read
"Set your PC to use the static IP address 192.168.0.66 (the router will have 192.168.0.86)"
This I have done successfully with several 841n v9 and v10, as well as with 940n v3 and 941nd v6
However,
If I try do do this with my two 1043nd v2, I get no connections, it looks like the 1043 requires different IP then the 841 and 940/941
Any sugggestions?
Edit
I become desperate
by that way I got fine several wr841n v9 and v10 and wr940n v3 back to original TP-Link firmware, but I have two wr1043nd v2 that I fail always. Habe no idea anymore. TFTP gets no connection to router.
Hardware Version : v2
I refer to http://wiki.openwrt.org/toh/tp-link/tl-wr841nd#go_back_to_original_firmware
There is to read
"Set your PC to use the static IP address 192.168.0.66 (the router will have 192.168.0.86)"
This I have done successfully with several 841n v9 and v10, as well as with 940n v3 and 941nd v6
However,
If I try do do this with my two 1043nd v2, I get no connections, it looks like the 1043 requires different IP then the 841 and 940/941
Any sugggestions?
Edit
I become desperate
by that way I got fine several wr841n v9 and v10 and wr940n v3 back to original TP-Link firmware, but I have two wr1043nd v2 that I fail always. Habe no idea anymore. TFTP gets no connection to router.