ARCHER C60 won't connect via LAN cable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ARCHER C60 won't connect via LAN cable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ARCHER C60 won't connect via LAN cable
ARCHER C60 won't connect via LAN cable
2017-01-03 06:10:48
Model :

Hardware Version :

Firmware Version :

ISP :

Hi All,

I have a very new Archer C60. Tried to setup via my new iMac. Won't work. 192.168.0.1 and 192.168.1.1 didn't open anything. Tplinkwifi.net also didn't worked. I could only access the new blue UI via my mobile. The problem is that my mac shows that ethernet connection is live and I am connected via cable. I can not access via LAN. Only via iMac wifi connection. My mobile devices are also working.

If I open tplinkwifi.net from my mac (via Wifi) it shows the mac device as connected.

I want to use the cable connection that just worked fine with the former tplink router.

Could you help me?


Screen attached



  0      
  0      
#1
Options
3 Reply
Re:ARCHER C60 won't connect via LAN cable
2017-01-03 09:07:24
Hi there, have you ever change the LAN setting of router? LAN IP is 192.168.0.120 and mask is 255.255.0.0 ?
Then please try 192.168.0.120.
  0  
  0  
#2
Options
Re:ARCHER C60 won't connect via LAN cable
2017-01-07 20:03:48
Hi. Made a factory reset. The same problem. Both address is dead. 192.168.0.1 and tplinkwifinet. Can't open them. Mac IP is 120 mask 255.255.255.000
  0  
  0  
#3
Options
Re:ARCHER C60 won't connect via LAN cable
2017-01-07 22:44:35
It seems that you have changed the router's LAN IP address or management IP address.
Could you please provide a screenshot of your Mac's IP parameters after the factory reset?
And try to access the router via 192.168.0.120
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1254

Replies: 3

Related Articles