TL-WA901ND Repeater with different network and different (SSID)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA901ND Repeater with different network and different (SSID)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA901ND Repeater with different network and different (SSID)
TL-WA901ND Repeater with different network and different (SSID)
2017-04-22 10:58:20
Region: Argentina


Model: TL-WA901ND


Hardware Version: V4


Firmware Version: 3.16.9 Build 151029 Rel.53634n












Hello everyone!


My problem is the next:


I need to connect to another router that provides internet and has DHCP enabled, wirelessly, but on a different network and use it with another SSID.


Teams of the 2 nets DO NOT see each other.




Router With Internet and DHCP Active IP: 192.168.100.x


My AP TL-WA901ND IP: 192.168.10.x


I did not find a way to connect and they are in different networks, since if I activate the DHCP of the TL-WA901ND in mode "Bridge whit AP" both fall "


Bridge with AP
Does this team have limitations to do this job?


Conclusion:




I need:


1 - The Internet Router is in the IP network: 192.168.100.1 with DHCP Enabled and SSID "xxx1".


2 - My AP TL-WA901ND is in the IP network 192.168.10.1 with DHCP Enabled and SSID "xxx2".


3 - My AP must be connected wirelessly to the Router with Internet, and Distribute it in my own NETWORK.


4 - The teams of the 2 Networks, DO NOT see each other.


I await your comments.






Thank you so much
  0      
  0      
#1
Options
3 Reply
Re:TL-WA901ND Repeater with different network and different (SSID)
2017-04-27 15:43:16
nobody knows??
  0  
  0  
#2
Options
Re:TL-WA901ND Repeater with different network and different (SSID)
2017-05-01 16:28:03
2 - My AP TL-WA901ND is in the IP network 192.168.10.1 with DHCP Enabled and SSID "xxx2".

I think so that you need WISP mode in your network staff. Typical access point, like WA901ND, doesn't have NAT mode.
  0  
  0  
#3
Options
Re:TL-WA901ND Repeater with different network and different (SSID)
2017-05-17 01:38:07
For me I may try 2 way,

-------------------------------------------------------------------------------------------------------

Plan A, (may not work)

Source of Internet or Gateway (DHCP)- 192.168.100.x (Group A)
-
Offsite with TL-WA901ND as "Bridge with AP"
Sample:
Survey and connect to Gateway 192.168.100.x (Group A)
Local Wireless setting to "AnynameUlike" and WPA password stuff
Network setting to "Statis IP"
IP setting to 192.168.10.1 / 255.255.255.0 (or any you want for Group B)
DHCP Server enable
-
Then Group B just connect to TL-WA901ND SSID

--------------------------------------------------------------------------------------------------------

Plan B. Put one old or cheap router behind TL-WA901ND. Idea is,

Source of Internet or Gateway (DHCP)- 192.168.100.x (Group A)
-
Offsite with TL-WA901ND as "Client mode" and bridge with Gateway 192.168.100.x (Group A)
Sample:
TL-WA901ND (Client mode)
Survey and connect to Gateway 192.168.100.x (Group A)
IP setting to "Static", IP address to 192.168.100.254 (or any unused)
DHCP to Disable
-
Connect via Ethernet of TL-WA901ND to Internet port (WAN port) of old or cheap router
Sample:
Router LAN IP 192.168.10.x (Group B)
Internet Connection setting to "Static"
IP 192.168.100.154 (or any unused)
Gateway 192.168.100.x (as Group A Internet access Gateway, sample 192.168.100.1)
DNS 8.8.8.8 / 8.8.4.4 (or any of your local DNS)
WiFi setting for Group B (SSID and WPA password stuff)
-
Then all Group B connect to the old or cheap router SSID.

Best regard.
  0  
  0  
#4
Options