TL-WR940N Wan Problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR940N Wan Problem
Model :
Hardware Version :
Firmware Version :
ISP :
Hi. I have a TL-WE940N US with Firmware 3.16.9 Build 160617 Rel.58968n.
But when i put the wan cable, the router dont detect the conection.
I know the problem is not the modem because then i connect the pc to the modem i can use the internet.
Im using a pppoe conection.
When i connect the pc to the modem, the pc has conection and i can do the pppoe link.
When i connect the router (wan) to the modem the router dont turn on the conection yellow led, and if i trie to use pppoe it says "
The cable is unplugged.
".
The router has other ip 192.168.2.1
And has statistics disable.
Please help
Hardware Version :
Firmware Version :
ISP :
Hi. I have a TL-WE940N US with Firmware 3.16.9 Build 160617 Rel.58968n.
But when i put the wan cable, the router dont detect the conection.
I know the problem is not the modem because then i connect the pc to the modem i can use the internet.
Im using a pppoe conection.
When i connect the pc to the modem, the pc has conection and i can do the pppoe link.
When i connect the router (wan) to the modem the router dont turn on the conection yellow led, and if i trie to use pppoe it says "
The cable is unplugged.
| Setup Wizard - WAN Connection Type |
| [/TD] |
".
The router has other ip 192.168.2.1
And has statistics disable.
Please help
