Archer Mr200 - Set LTE as resilience
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer Mr200 - Set LTE as resilience
Model : Archer MR200
Hardware Version : Not Clear
Firmware Version :
ISP :
I am considering acquire the Archer Mr200, but first I'd like to be sure that router is capable to be setup to use WAN first (for Cable/ADSL), and LTE (4g) for failover in case of WAN failure. I have read the manual, also checked on the simulator ( http://uk.tp-link.com/resources/simulator/MR200 Emulator/index.htm) but still not clear to me, seems that this must be switched manualy.
Hardware Version : Not Clear
Firmware Version :
ISP :
I am considering acquire the Archer Mr200, but first I'd like to be sure that router is capable to be setup to use WAN first (for Cable/ADSL), and LTE (4g) for failover in case of WAN failure. I have read the manual, also checked on the simulator ( http://uk.tp-link.com/resources/simulator/MR200 Emulator/index.htm) but still not clear to me, seems that this must be switched manualy.
