TranasLV1Online
Following: 0Followers: 0
Forums/ 3G/4G Routers/MiFi
2020-11-24 17:13:50
Re:Unable to open ports on Archer MR600
@Ivaylo The issue has been resolved and was not caused by the MR600 router/configuration or the ISP but by a misconfigured Windows Defender firewall inbound rule. Evidently, not all TP Link routers...
3HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-11-24 13:18:28
Re:Unable to open ports on Archer MR600
@Ivaylo If I enable remote access via port 8080 I can remotely access the router configuration from another machine and another ISP. Everything works as you would expect it to. You can ping 8080 or...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-11-24 12:18:56
Re:Unable to open ports on Archer MR600
@Ivaylo Reconfigured to TCP 80 - shows as closed. Don't know what to say about the ISP. TELE2 is large and seemingly competent. The tech guy I spoke to on Monday was pretty clear when speaking about...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-11-24 11:52:11
Re:Unable to open ports on Archer MR600
4G router...
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-11-24 11:44:13
Re:Unable to open ports on Archer MR600
@Ivaylo The higher port number also times out. I am using the router as a 4F router. For now, the only wired/attached device is the PC.
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-11-24 10:28:19
Re:Unable to open ports on Archer MR600
@Ivaylo Thanks for the response Ivaylo. Yes - I am connecting to the proper IP address. That is why the 443 port is visible when Remote Management is enabled. The IP shown by whatismyip.com matches...
0HELPFULS
12