@mazzaris will be nice to have option, to disable messages about this, especially those send by e-mail.

@David11 Hi, I think, in standalone mode you may configure only one vlan on every ports i hope they change this. Im not shure it working with many vlans but try this: try to change VLAN pvid on LAN...

@David11 Hi, If it is not a problem reset AP and TL-R605 to factory settings, and try again with automatic DHCP settings. I don't remember for sure, but in standalone mode TL-R605 don't have...

@Dillius You may try use this method: if you network is 192.168.2.0/24 (255.255.255.0) 1. Set manual IP adress of TL-R605 in standalone mode, NETWORK-> LAN -> LAN ip: 192.168.2.1 subnet:...

I had big problem when I configure AP's to work with oc200 and TL-R605 (using manual IP, mask, gateway and DNS addresses). In this configuration I used tp-link switches but not dedicated for Omada....

Request/Suggestion: - WIFI Profile on/off (now it's possible with time range but is painfull) - DHCP manual/static for AP - manualy add devices to "KNOW CLIENTS" page / or if is possible in "EDIT...