@rumblpak I am using a Cisco Layer 3 Switch (4506E) with different EAP connected, however, the concept should be the same. If I understand what you have listed, it is roughly the same as I have. I am...

Create a new LAN that is not VLAN 1. Make it VLAN 10 (doesn't matter, any valid VLAN ID will work). Make sure that the LAN has a valid subnet range that does not match your default lan. make it...

These 2 lines are in the logs now, while I had an active ping going on with 0 packet loss: tbcmc-admin-radius-vm is connected to tbcmc-gateway-gw on management_vlan network. Dec 20, 2023 09:11:40 am...

@Virgo I am not sure what a block on the ports on the VM means. Regarding physical connections, the Omada Controller and the other VM's are all hosted on the same physical server. There are some...

I keep getting messages like the following: tbcmc-staff-radius-vm was disconnected from network "management_vlan" on tbcmc-gateway-gw(connected time:8m connected, traffic: 98Bytes). in the event logs...

It's under Site Settings. Check the box for 'Show Advanced Settings', then look under the advanced settings. (EDIT: I am on a slightly updated version of the Controller, but I think it is in the same...