@ITV Go to Insight-past connections-association failures and sort the associated column by date. This should show you the client, EAP, and the SSID it was trying to connect.

@massimilianop You can't uncheck any of the changeable wan/lan ports on the default lan (not talking about lan port, I'm talking about the system generated lan network) and save the change. Maybe a...

The system won't let you uncheck the ports on the default Lan and save the change. You get an error message "the purpose of the default lan can not be changed". The ER605 is vlan aware but can only...

Correct, create one group with the clients you want to block 192.168.3.1/24 and one with just the router IP. Create a switch or EAP ACL to deny access from clients group to router group. When...

@massimilianop The ER605 can only DHCP on one subnet, so you need an Omada compatible switch to do what you want.

@clemsongt You can put the clients you want to block in an IP or mac group. If you use an IP group you need to reserve the IPs for the clients. Then implement an ACL at the switch or eap level to...