Forums/
Switches
2022-02-24 08:38:04
@DannyZ Yes it should be enable on each VLAN that you want to connect a receiver host. No need to enable 2 and 3. Here is the instruction for you:https://www.tp-link.com/us/support/faq/2223/
0HELPFULS
Forums/
Controllers
2022-02-24 08:21:46
@jandico Switch ACL won't take effect because your workstation is connected to the wireless network. Other devices will be able to communicate with it, only go through the EAP chips. The data won't...
0HELPFULS
Forums/
Routers
2022-02-24 07:43:06
@NestorB This router doesn't support Link Aggregation on the WAN port. The second WAN is used to link up another modem
0HELPFULS
Forums/
Routers
2022-02-24 07:20:57
@devn3t I guess the problem could be on the dockers' gateway settings. If the dockers only communicate with each other via LAN and all of them are behind your docker server, then their data will not...
0HELPFULS
Forums/
Routers
2022-02-24 06:44:54
@MrCollins I guess the problem is more related to the DNS server or something, not the switch. Try this: 1. Under URL filtering, delete all EAP rules, only leave the Gateway rules; 2. connect a PC to...
0HELPFULS
Forums/
Routers
2022-02-24 06:31:08
1. The Remote Host can be 0.0.0.0 means any IP range. Tplink only mentioned this in their standalone guide but I believe it also works for controller: https://www.tp-link.com/us/support/faq/2162/; 3....
1HELPFULS