@frank-IT-GUY Similar problem exists in NX200v1 routers. There is 6 seconds sleep before initiating reconnect. DelayedConnectBackHaul:407]FSM: Will connect in 6s later. (test firmware has this entry...

@Mohamed_E Check cell-id and if moving to different location improves. I get three cell ID's and all nearby in Dammam-Alfaisailia area. 191579663 20295942 20427010 I also get more cells and...

@David-TP Sometimes all three 5G bands are listed but most of the time only N78 and N77 gets listed. BTW even firmware 1.8.0 has multicell error.

@Mohamed_E This issue exists for me too. N40 hardly appears in manual band search mode. Few issue still exists for me. 1. Manual search doesnt show N40 but signal quality of N40 is much higher than...

@Amer-Hash I notice you are on KSA STC network. Request for beta firmware Firmware Version:1.7.0 3.0.0 v60a2.0 Build 260204 Rel.41445n_Beta This has multicell fixes (30+ nearby cells) for KSA...

@Pengrororororo Should work, I use similar setup and made NX200 wifi hidden. Mesh may have signal issue between nodes and I connected via CAT6 cable, evaluate wifi-7 mesh as they can combine bands...