@David-TP thank you for your help. that was exactly what my network layout is. All settings as default and cables are fine as i used it before with other routers before I installed Deco system. what...

Hello, I recently purchased Deco XE75 (3 Packs). my layout is: fiber cable --- ISP Modem(router) ---ethernet to port 1---Main Deco. Main Deco --- ethernet from ports 2,3 --- Deco2, Deco3. Deco on...

RouterHang wrote @terziyski lets say about another brand (about 25 USD price) if another brand flashing using china firmware, the signal coverage and power 3x much stronger than AX10 , he can pass 4...

@terziyski thanks for your help, i just do this steps in AX50 - change mode to AP - static IP within main router range - connect LAN >> LAN - disable DHCP server it works great for now, hope this...

@terziyski Thanks for you quick response. Is below step necessary? terziyski wrote Set AX50 IP address outside or at the end of ISP router DHCP IP address range. Should put AX50 IP out main router...

Hello, i purchased Archer AX50 2 days ago, setup manual. 1- ISP router ONT ---- Archer AX50 (cat6) 2- ISP router gateway 192.168.100.1 3- Archer AX50 static IP 192.168.100.90 4- Archer AX50: -...