BenLLV1Online
Following: 0Followers: 0
Forums/ Switches
2023-07-18 12:33:37
Re:TL-SG2210P + Omada not reporting PoE port status, cannot do PoE Recovery
@Clive_A - you were correct; this was fixed by updating my Omada installation to 5.9. I can confirm that under Omada 5.9.31, the TL-SG2210P is displaying the expected PoE 'lightning bolt' icons and...
1HELPFULS
Forums/ Switches
2023-07-11 03:20:58
TL-SG2210P + Omada not reporting PoE port status, cannot do PoE Recovery
I have a TL-SG2210P v3.20 Firmware Version: 3.20.9 Build 20230602 Rel.73473. In Omada (4.4.8), it is not reporting which ports are PoE powered. Here is a screenshot of the switch ports: - ports 5 and...
0HELPFULS
Forums/ Accessories
2021-10-06 09:51:04
TL-POE10R PoE Splitter blinking/flashing? A: requires a minimum output load to function
I just had a very frustrating experience with the TL-POE10R PoE splitter. I connected it to a PoE switch and attempted to measure the output voltage using a multimeter, but the device simply sat...
6HELPFULS
Forums/ WiFi
2021-09-12 13:29:57
Re:(EAP110) Portal Access from SSID in different VLAN
This issue still exists with the EAP110-Outdoor v3, as of fw 5.0.1 Build 20210316 Rel. 38795(5553). FTR: the EAP110-Outdoor in standalone mode - no Omada controller - provides a basic captive portal...
0HELPFULS