MacDknifeLV1Offline
Following: 0Followers: 0
Forums/ Access Points
2013-01-14 21:37:06
Reply to borg_ph: suggestion about changing TL-WA901ND's LAN IP
Hi again borg_ph! You do realise of course that to be able do this, I have to be connected to the TL-WA901ND and that was the problem I had from the start. As you can read in my own reply (2:nd...
0HELPFULS
Forums/ Access Points
2013-01-12 05:52:55
reply to Borg_PH suggestion
Thanks for your reply! I have already thought of that and it would seem easier to go that way, but it's not. The routers LAN IP is the same as the LAN gateway IP and I cannot change the gateway IP...
0HELPFULS
Forums/ Access Points
2013-01-10 18:09:55
Ooops! Addenum
Unfortunately I could only get this to work in Windows 7 Pro (64-bits). When I tried this on my other computer with Windows XP Pro (32-bits) it did not. The network complained that the network cable...
0HELPFULS
Forums/ Access Points
2013-01-10 07:08:22
Well, I solved this myself in the end!
The instructions in the manual/user guide are wrong and misleading. One cannot manage the AP wirelessly if one hasn't entered the gateway IP address (e.g. the routers IP, which is normally your wired...
0HELPFULS
Forums/ Access Points
2013-01-10 01:57:34
Cannot connect to AP through default IP 192.168.1.254
Region : Sweden Model : TL-WA901ND Hardware Version : V2 Firmware Version : ISP : Comhem Hi! My employer bought an Access Point, TL-WA901ND. When I connected it to the LAN it worked perfectly at once...
0HELPFULS