Hi @MR.S To assist you better, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID TKID240557382, please...

mbze430 wrote @Hank21 I am using the Linux(Ubuntu) controller Here is the controller's setting: Here is the site configuration: Hi @mbze430 Have you tried to reboot the EAP when you configured the...

mbze430 wrote @Hank21 In the guide iin both section of the guide, 4. Reconnect the controller to switch A through port 4 (the idle port configured in step 2). 5. Reconnect the controller to switch A...

Hi @mbze430 Is there a way to configure the management via CLI? Here is the CLI command guide for your reference. When you enable Management VLAN on the interface does it turn the packet to QinQ? No,...

Hi @Medster87 Do you have any other devices that support mesh from other manufacturer? Will you encounter the same issue when you wired connect to the router? If you would rather, you may consider...

Oliv2831 wrote Hello, I'm thinking about the following process to control WiFi devices in a PPSK environment without Radius. My ultimate goal is to keep user from passing PSK to each other but...