@lukass2000 -50's is PLENTY as long as it's clean. I have stable 225 Mesh links in the mid -80's. I suspect you have a noisy channel or voracious clients. What is the EAP225 reporting as Interference...

@j4nd3r53n from the 'gear' icon for Settings at the bottom left corner, Select Wired Networks, then the LAN subnet you wish to disable DHCP on. There is a tick box as below

@Family_AM To further refine the above correct answer, this is exactly what I do. I have created a LAN network, assigned it to it's own VLAN, mapped that VLAN to a dedicated physical port on my...

Hi, My ask is to: 1. show only relevant info in the widget, ie only show full size bars for active channels, especially in the 5G band 2. fix the apparently 'missing' info (ch48 shows on mouse-over,...

@7ippy Not a bad idea...I would jack into the second port of your controller with your laptop statically configured to be on the same subnet. That way if the switch cuts you off from the router...

@7ippy There's actually a section in the Config portion of my 2008P switch that looks like the below, so shberge is correct: The interface also links you to a config guide which might be worth a...