@woozle yes both can. For each is captive Login nessacery. DHCP answer through Range extender needs on Client a or Client b 2 Minutes. Sometimes even Time out. without c50 dhcp request ist below 1sec...

@woozle i don't think so. As Bridge now it works, but DHCP request needs about 2 min to be answered. (Without c50 1 sec) i assumed, that Smartip is working as Bridge (because dhcp off) - and with...

@Fms_muc Just now i did a configuration (Assumed Bridge). C50 with Static IP 10.10.6.25 / 255.255.0.0. Dissabled DHCP Server - because ISP has DHCP. ISP Network 10.10.x.x then reboot C50. No Connect...

@terziyski that means, 841n Software can do NAT, C50 cannot. will be in the Future a Firmware with wisp on C50?

@terziyski Smart ip does not work. either Range extender would be only bridging, then you would be right. As i understood, c50 with Static IP should do NAT, then different IP would be mandatory. by...

@terziyski as i told you - ISP Gateway is 10.10.0.1 and Range ( i guess) is 10.10.x.x for example i got 10.10.6.30 But This does not matter. If C50 works with NAT, the client dhcp request should go...