@ARGamingPK1 this if for the X20, the BE65-5G i bought did not have this fuctionality. Anyway, since the VPN client (IPSEC, OPENVPN, L2TP) did not work and since there was no way to setup static...

@David-TP I have a BE65-5G, it does not have any static routing capabilities, even with the latest firmware version Deco BE65-5G(EU)_V1_1.0.5 Build 20240904 from 2024-10-08 Indeed, such a high-end...

@David-TP no feedback on this request ? I tested the BE65-5G OPENVPN client with several OPENVPN servers (TP-Link MR-600, Linux OPENVPN AS) . In any case from my central site (for instance TP-LINK...

@t0urista I tried this setup, strictly following the process, it does not work.... the OPENVPN tunnel can be established, as shown on both the DECO (remote site, client) and the Archer MR600 (central...

Hi I bought a router DECO BE65-5G for a remote site behind a CGNAT IP, typical setup nowadays for a 5G connection on the central site I run a TP LINK MR600 with public IP and DDNS and with OPENVPN...

@David-TP Although I fully agree that TP-link should fix this, you can still try to restore the lastest stable version with the firmware recovery method described here...