@Joseph-TP "Main AX72" is the main controller for all devices, so in Easymesh mode it was the ".1" device that was used to control and add the devices. In AP mode it is the only device not in AP...

@Joseph-TP Hi, and don't worry about how long it's taken, all good as moving to AP mode, although introducing a small drop out (like less than a second) when moving between AP points, it it very...

@terziyski I have finally read through the information you linked to, I am following what it says "set to off", which is already done: So while I believe that the DHCP noise could be turned down with...

@terziyski hey, is that the DHCP server = auto? If so I have DHCP Server set to off on all of them to disable that. And yes I could 100% go to static, it's a weird bug and clearly shows that one side...

Just as and FYI - and I don't have this router, but I do use an AX72, I have not had to mask my MAC for it to work, and Vodafone appear (luckily) pretty chill about having 3rd party routers...

@Tail_uk And here is a tcpdump over 1 minute monitoring my server (DHCP) to 1 of the APs on port 67 and 68 23:14:21.948347 enp4s0 In IP (tos 0x0, ttl 64, id 4905, offset 0, flags [DF], proto UDP...