Frost90LV1Online
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2024-02-20 17:57:37
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Kevin_Z Tried with 4 different cables, negotation speed is always based on luck, it's 50/50 between 100mbps and 1000mbps. The Auto-Negotiation is faulty in my opinion. Regarding Wake on LAN, I was...
1HELPFULS
Forums/ Wi-Fi Routers
2024-02-17 11:37:21
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Kevin_Z I managed to get a 1000 mbps connection for AX23 and EX220. The secret was to remove EX220 and sync it again while praying really hard, after the 4th attempt I managed to get 1000 mbps...
0HELPFULS
Forums/ Wi-Fi Routers
2024-02-15 18:34:59
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@woozle Thanks for taking the time to answer. It runs at 100 mbps on both the WAN port and LAN port #1 of the EX220 (will try LAN ports #2,3 and 4 too since I have no other ideas). Since EX220 is in...
0HELPFULS
Forums/ Wi-Fi Routers
2024-02-15 17:30:35
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Kevin_Z I connected an AX23 and an EX220 via ethernet backhaul however there is one problem: the connection between the two is 100 mbps instead of 1000 mbps. The cable is Cat6 and was previously...
0HELPFULS