@Element2050 Hi Element2050, Your behavior differs from what I experienced. There is a simple test for this, when the ESP device is connected to the WLAN, reboot the ESP device. It should then...

The problem is that random ESP devices are causing up to 150 MQTT disconnects per 24 hours. Configuration: 5x X50 Decos and 3x TP-LINK managed LAN switches, the DECO backhaul is via a Gbit LAN. No Rx...

@David-TP I have performed a PING from a Windows PC connected via LAN to an ESP32 WLAN device with a fixed IP address, each test performed 48 hours after a reboot of the DECOs. The WLAN device...

@BTJansen If possible, could you do the following test and let me know if you get the same results, Open 3x CMD prompt in Windows (WLAN) and ping the following IP addresses with -t - CMD1, [IP of an...

Hello All, I've finished my testing and analysis, BUG: The ISP modem (DN9245W-10) should not be used as DHCP server, it has a bug and disable the new IP address assignment after 1-48h, reboot is...

@BTJansen Today I have deleted the DECOs and added them again but as AP, Smart DHCP disabled, Fast Roaming and Beam forming enabled after rebooting the whole network, the Espressif are listed as...