IPv6 works a bit differently from IPv4, so there’s no “port forwarding” section for it. Instead, the Archer AX53 blocks all unsolicited inbound IPv6 traffic by default through its IPv6 firewall, even...

I’ve got a similar setup here with two RE700X (V2) units - one of them connected via Ethernet backhaul to my main router (Archer GE800), both running the same 1.2.0 Build 20250808 firmware - and I...

In theory yes - both the MR47BE and MR27BE state EasyMesh support, and TP-Link’s Archer GE550 supports EasyMesh too. Make sure you update firmware on all devices, enable EasyMesh on the GE550 first,...

That’s a solid router, but I see what you mean - 25 MB/s for SMB transfer definitely sounds lower than expected. Let’s go through a few checks to narrow it down. First, confirm whether you’re testing...

Good question, Ren - that setting is supposed to persist after saving, so if it’s reverting back after you reload the page or reboot the router, it’s likely a small firmware bug. You can try these...

It’s a good question - you don’t necessarily need to cancel your landline service before using the Deco as the main router, but it depends on how EE has provisioned your connection. If your EE...