Forums/
Wi-Fi Routers
Yesterday
When the AX53 is set to WPA2/WPA3 mixed mode, PMF (Protected Management Frames, 802.11w) is required for WPA3 clients and optional for WPA2 clients. That means WPA2 devices can still connect even if...
0HELPFULS
Forums/
Wi-Fi Routers
Yesterday
It might be worth checking the power adapter - if it’s not delivering stable voltage or is slightly damaged, that could cause the router to restart by itself. You can try using another adapter with...
1HELPFULS
Forums/
Range Extenders
a week ago
Hi, could you share a bit more detail about what exactly isn’t working? For example - are you unable to connect to the extender’s Wi-Fi, or is it connected but there’s no internet? Also, do the LEDs...
1HELPFULS
Forums/
Wi-Fi Routers
a week ago
Since your old C50 works fine on the same PPPoE line, it’s likely a configuration detail rather than a line issue I’d suggest comparing the settings from both routers side by side - including the...
1HELPFULS
Forums/
Wi-Fi Routers
a week ago
As far as we know, the EX510 Pro doesn’t currently support VLAN tagging in AP Mode. VLAN functionality is only available on some router models (like the higher-end Archer BE/AX series) that have...
2HELPFULS
Forums/
Deco
a week ago
Hi, we can try to help you out with that, just to confirm - are you using the Deco app on Android or iOS right now? Also, did this start happening right after the 1.6.1 firmware update? If possible,...
0HELPFULS