Finally, I've got it to work as it should: - disconnected the LAN connection between router and access point - removed both from their power socket - connected the access point to my PC and reset it...

Hi @Joseph-TP Thanks for the hint! I referred to that link before, but I used the wrong LAN port (WAN/LAN instead of LAN1-3) The picture under step 4 isn't clear at the point IMO. I now have an...

@woozle Anyway, as long as it works like it does now, I won't touch anything! Thanks a lot for your support!!

@woozle Strange...! Neither I can't find the MR600 in the AX55 childs list. The only child that is "unknown" to me is an "IEEE Registration Authority" with an IP 192.168.0.53. Maybe the MR600 is...

@woozle Hi, thanks a lot, the wrong LAN/WAN port was the solution! The connection works fine now, the only thing I can't do any more is to open the configuration site of my MR600 in the browser. I...

Hello, I've serious troubles configuring my old Archer MR600 as an access point, connected to my new main router Archer AX55! The AX55 has an IP of 192 168.0.1, and an IP-range for clients from...