StFualLV1Online
Following: 0Followers: 0
Forums/ Feature Request (Routers)
2 weeks ago
Ability to allocate and configure a 2.5Gbe port for WAN and free up 10 Gbe LAN port
Summary. Request is the ability to configure and use a 2.5Gbe port as a WAN port. Detail The Archer BE800 has 2 x 10Gbe ports and 4 x 2.5Gbe internet ports. 10Gbe ports can be configured for WAN or...
2HELPFULS
Forums/ Wi-Fi Routers
2 weeks ago
Re:GPON ONU Only Negotiate at 1Gbps with Archer BE800/BE900/GE800 V1 10Gbps SFP+ Combo Port
@Kevin_Z I just tested BE800 to BE800 with an Ampcom Passive 10 G SFP+ Dac Twin Ax 3 Metres copper. It takes a while then negotiates to 1Gbs - never seen any faster. Tried switching each device, both...
0HELPFULS
Forums/ Wi-Fi Routers
2025-05-20 10:02:18
Re:Known working devices / network interfaces
The two configurations i am considering and would like a working solution for.. BE800(Fiber SFP+ Module)<===Optical fiber===>(Fiber SFP+ Module)BE800 Currently running 15M 10Gbe BE800(Fiber SFP+...
0HELPFULS
Forums/ Wi-Fi Routers
2025-05-06 06:12:43
Known working devices / network interfaces
I run the following for among other things a streaming VR setup PC ├─ Intel i9-14900 96GB ├─ Windows 11 ├─ NVIDIA RTX 4090 └─ TP-Link TX401 (10GBase-T, AQC107) ↔ 3m Cat7 TP-Link BE800 (Router/Switch...
0HELPFULS
Forums/ Wi-Fi Routers
2025-02-26 12:58:56
Re:BE800 LACP Support in AP mode?
@StFual So to be certain I should reset the router, configure LACP and then switch it to AP mode ?
0HELPFULS
Forums/ Wi-Fi Routers
2025-02-26 12:56:35
Re:GPON ONU Only Negotiate at 1Gbps with Archer BE800/BE900/GE800 V1 10Gbps SFP+ Combo Port
@StFual Tested the 15M SFP+ 10G Fibre backhaul. It worked but it only ever ran at 1Gbs . Tried combinations of reboot and replug but never saw faster than 1Gbs. Also the negotiation was slow compared...
0HELPFULS
12