@RisingMonk try moving to port say 5. I can't remember exactly which two ports started off as WAN, it could have been first 2.5G and first 1G, so thus ports 1 and 3. You might be connected to a WAN...

It there a configuration possibility I am missing? I cannot get either DNS Proxy and LAN-DNS to work for IPv6 clients. My findings: -------------------------- If you enable the Gateway DNS Proxy...

@maliawelli the latest 1.1.0 firmware adds this feature, unfortunately there are problems for IPv6. LAN-DNS only works if clients use the gateway as their DNS server/proxy. However the ER7412-M2...

@gautamkrishnar agree, LAN-DNS is an awesome addition and something many had been asking for! The per-network option is excellent too. I immediately ran into a couple limitations: I could not FORWORD...

@RisingMonk I found the ER7412-M2 troublesome too. (1) Mine wouldn't work until I hard-reset it and update the firmware, it shipped with firmware too old for current Controllers (2) Then you have to...

Pro-tip, if you're choosing products on the Omada website you can filter by "Special Hardware Design" -> "Fanless Design" and only see the fanless options. This is one of the reasons I evaluated a...