I assume you have Enable SSID Broadcast turned on. On your WIFI device, you may have to re-establish the network by deleting (forget this network) and reenter the userid and password.

Does your device support UPnP and is it turned on? If so, do you see them in the router settings? I just looked up and it appears you will be using port 25565. You may need to set up static routing...

When you connect to the router, an IP address is assigned to the device such as 192.168.0.119. Every device has a MAC address which most times is printed somewhere on the device. What you want is to...

I have a C8 router and use port forwarding. I did have an issue with port forwarding after I upgraded the firmware with the green GUI on the C8. After working with TP-Link support, I ended up going...

I have a TP-Link Archer C8 and when I updated the firmware it changed the GUI from blue to green. I had port forwarding issues with the new firmware. After working with TP-Link support, I went bank...

Can you get to the drive via pressing the Windows Key and 'R' and then entering \\192.168.0.1