@terziyski Actually, looks like the Guest Wifi is now working as I can now see a device connected, so I suspect this was fixed by the firmware upgrade. I'll repeat the work on the second AP, which...

@terziyski Thanks for providing the additional link. I still don't quite fully understand the advice around setting multiple VLANs as Untagged on the same port(s), though - this goes against common...

@terziyski Just a quick update on this, I ended up getting someone onsite to power cycle the AP, and it has now come back online again (albeit it in a factory reset state) - the update did apply,...

@terziyski Many thanks for coming back to me so quickly. I've started by upgrading the firmware on one of the two APs. Unfortunately, the AP has not come back up after the firmware upgrade, despite...

Sorry, on the above diagram the ES205G on right should show as being connected to "Port 9 (VLAN 1 Untagged, VLAN 2 Tagged)" not Port 3 (the forum won't let me edit the original post until after 24...

I'm having issues with a Multi-SSID VLAN configuration, whereby I'm trying to implement a Guest Wifi SSID on VLAN 2. In my setup, I have the below: 2 x TP-Link TL-WA901ND access points 2 x TP-Link...