guilherme1846LV1Offline
Following: 0Followers: 0
Forums/ Range Extenders
2018-01-29 22:17:00
Channel width
You can set a 40 Mhz channel to have 300 Mbps.
0HELPFULS
Forums/ Range Extenders
2018-01-22 18:01:08
Re:re200 does not reconnect
You can reset your RE200 and configure it manually through GUI. Check RE200 Configuration guide
0HELPFULS
Forums/ Range Extenders
2018-01-22 17:58:22
Re:No internet on 2.4GHz band on RE200
Hello Adam, check the connection between the RE200 and your main router. Also make sure you main router is distributing IP to the RE200, if not you can assign a static IP. You can also check the...
0HELPFULS
Forums/ Range Extenders
2018-01-22 17:54:22
Re:Can I change the wifi channel? (RE200 AC750)
Hello @Javielfo. I did some tests and i found this: If you are talking about 2,4Ghz band when you connect to 5Ghz and the repeater extend 2.4 Ghz. It will automatically use a different channel that...
3HELPFULS
Forums/ Range Extenders
2018-01-20 08:01:18
RE200 no Channel select option
Model : Hardware Version : Firmware Version : ISP : Hello, there is no option to select the wifi channel on the RE200 repeater. Do you guys know how to do it? I'm having so much interference on...
0HELPFULS
Forums/ Range Extenders
2018-01-20 07:52:31
Re:Can I change the wifi channel? (RE200 AC750)
I have the same question. I am repeating a 2.4ghz signal but RE200 extended it to another channel which is very busy. On the advanced configuration page we do not have the option to select the wifi...
0HELPFULS