@MMGray Thank you for your post. When the connection drops, can you still ping 8.8.8.8? Alternatively, could you run a tracert to see where the packets are being lost? We also recommend capturing a...

@VolkerS Thank you for your post. Please note that the IP you intend to assign and the IP the camera is actually obtaining are not in the same subnet. You need to check your network configuration to...

@memseeker Thank you for your post. We recommend trying a different device or a different browser to access the Web GUI. Please confirm that your PC can successfully ping the switch during the...

@smyles Thank you for your post. Could you let us know if you have made any other configuration changes on the router? If possible, please perform a mirror (port-mirror) packet capture while...

@Graysilk Thanks for your post. Yes, you can plug the NVR1008H’s LAN port into the RE450’s RJ45; set the extender in “Range Extender” mode so it bridges the NVR to your existing Wi-Fi. The NVR stays...

@Babun-Sikder Thank you for your post. Please reconfirm that the issue you described occurs only on the SG2210P running firmware 5.20 and that no other switches managed by the Controller are...