@tdevm Hi, the issue you’re experiencing is due to firmware incompatibility, not a failed update. Your device is Deco X50-5G (V1.0), which is a different hardware model from the standard Deco X50 /...

@ARGamingPK1 From what I can tell so far, the main improvement is not directly on 5 GHz performance. Using different channels on 2.4 GHz mainly seems to reduce interference and congestion in that...

@ARGamingPK1 Wi-Fi Mode High Capacity (Enabled automatically and cannot be changed because I’m using Ethernet backhaul) 2.4 GHz Channel width: 20 MHz Channel selection: Automatic 5 GHz Channel width:...

@ARGamingPK1 Current Wi-Fi settings on my Deco X50 V1 (Firmware 1.8.0) Just to share my current setup and experience with these settings: 2.4 GHz Channel width: 20 MHz Channel selection: Automatic 5...

@David-TP I wanted to share some new findings based on the last few days of testing: • IoT Hotspot more stable 🟢 After switching the 2.4 GHz channel setting from fixed Channel 1 to Automatic, the...

@David-TP Hi everyone, after some more time testing the new 1.8.0 firmware on my Deco X50 V1, I’d like to share an update specifically focused on IoT network behavior — including some details that...