GlutierLV1Offline
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2018-11-01 00:53:57
Re:TP-Link Archer C1900 (Canadian Edition) cannot flash firmware, no QOS Settings
[QUOTE=RWElphinstone;252481]I am aware of this, however, your information is not entirely correct. While in the US, the FCC proposed locking down open-source firmware options that would allow higher...
0HELPFULS
Forums/ Wi-Fi Routers
2018-10-31 22:00:17
Re:TP-Link Archer C1900 (Canadian Edition) cannot flash firmware, no QOS Settings
Hi!The C1900 is highly configurable and has most of the features of the stand-alone TP-Link small office/home office routers. - There's no firmware update for the Canadian and US versions of the...
0HELPFULS
Forums/ Wi-Fi Routers
2018-04-15 22:20:50
Re:C1200 - Static route to block google DNS
Wow, this is so weird. I blocked Google's DNS too, and it works hmmm.I have two methods I can use on my C1900: bogus static routes and access control rules. After adding the routes, I have to reboot...
1HELPFULS
Forums/ Wi-Fi Routers
2018-04-15 16:23:26
Re:C1200 - Static route to block google DNS
IP addresses ending in 255 have a special purpose and cannot be used as a default gateway. Try 0.0.0.0 first. If it's rejected, use 192.168.0.254.
0HELPFULS
Forums/ Wi-Fi Routers
2018-04-14 07:39:07
Re:C1200 - Static route to block google DNS
Set the default gateway of your static routes to a non-existent IP on your LAN. I use 192.168.1.254 (my LAN is 192.168.1.0/24.) Set the subnet mask to 255.255.255.255
0HELPFULS
Forums/ Powerline Adapters
2018-03-14 22:49:59
Mixing different AV speed
Model : Hardware Version : Firmware Version : ISP : Sorry if it gets asked often, but I didn't find any clear answer.I currently use six TL-PA4010. I want *one* link faster than the others. If I get...
0HELPFULS
12