Adam-ITCommsLV2Offline
Following: 0Followers: 0
Forums/ Deco
11 hours ago
Re:Deco X50/X50Pro/X50-PoE Pre-Release Firmware 1.7.0 Introduces DoH/DoT, Channel Selection, and More!
@Solla-topee do you know if it includes the fix from the beta I got from support for the Captive portal?
0HELPFULS
Forums/ Deco
Saturday
Re:Deco M4 without Router/Modem
@Steveh10101 Steve I'm guessing from your description that you have FTTC over a phone line, with a BT master socket in your house. You can't connect that directly to an M4, you would need a BT modem...
0HELPFULS
Forums/ Deco
Saturday
Re:Using a Deco Mesh as the router instead of Sky Router
@harry66 Hey Harry, I'm pretty sure that if you have Sky FTTP and an ONT (not FTTC broadband using a phone line) then you will need a router that supports either: DHCPv6 PD authentication (no login...
0HELPFULS
Forums/ Deco
a week ago
Re:Allow lists for wireless access control on outdoor units
@Fishkeeper Unfortunately people have been waiting for some time to get updates on both the X50-Outdoor and POE models. If a feature you require isn't available in the firmware for the model/revision...
0HELPFULS
Forums/ Deco
a week ago
Re:Deco Heatmap missing
@RyanAPalfrey I think the heatmap tool is specific to the pre-release version of the app available here: https://community.tp-link.com/en/home/forum/topic/854924?moduleId=39 If you update the app...
1HELPFULS
Forums/ Deco
2 weeks ago
Re:Second Access point - Impossible to set up
@reformy Yup, a switch would work, just depends on the complexity of your setup. I use a lot of unmanaged cheap switches from Amazon and they work fine. Its usually when you use a managed switch that...
0HELPFULS
123...