Rod-IT wrote Even if you borrow a device and set them up to roam and be a pair using the same SSIDs, if the controller is not available, then roaming and hand-over also becomes unavailable. It's the...

Pascal wrote May I know how we can upgrade OC200 to controler 3.2.5 ? as actually I only found latest firmware 1.2.3 Build 20200430 Rel.52621 that is still with controller 3.2.12 Not sure what you...

perlhead wrote but the point stands that the ssh functionality seems to be completely pointless if I can't use it to do the things I would do via the web interface (including reboot). SSH access once...

@JeremyHiggs, first of all, -50dBm is a very good signal quality. A client will not change bands if the RSSI is -50dBm. Secondly, band steering does not depend on RSSI, but solely on number of...

DanL wrote S/N is currently only 20db, so going to need to keep working on improving that (raising the CPE's on either end higher will help the most I think, I moved one of them out from behind a...

@paparazz01, as you can see from the log, the adopt failed at all. Press the EAP's reset button for 5-7 seconds (not the PoE injector's button) until the LED starts to blink to restore factory...